RSS Notification

NCP1392  NCP1393  :  Self-Oscillating 600 V Half-Bridge Drivers with Brown-out Input

• Adjustable operating frequency from 25 to 250 kHz with a single resistor
• Adjustable brown-out protection ensures correct bulk voltage operating range; fixed dead time helps prevent shoot through current
• NCP1392B features an autorecovery enable input; NCP1393B features a latched input for severe fault conditions

NCP1034  :  100 V Sync Buck Controller

• PWM controller for wide input range synchronous buck dc-dc applications; ideal for +48 V or +60 V inputs
• 2.0 A capability; drives a pair of external N-Channel MOSFETs
• Programmable switching frequency up to 500 kHz; optimized for efficiency and size

ADP4000  ADP4100  :  6-Phase VR11.1 Controllers for Desktops and Servers

• Can be programmed for 1- through 6-phase operation; construct up to six complementary buck switching stages; 7.0 x 7.0 mm LFCSP-48
• Power state indicator can be used to reduce number of operating phases at light loads
• ADP4000 includes a PMBus interface to to program system set points and monitor key system performance data

NCP1080  NCP1081  NCP1082  NCP1083  :  Integrated PoE-PD and DC-DC Converter Controllers

• Integrated solution for medium and high power Ethernet applications; NCP1080/1 PoE eliminates local power supplies/adapters, NCP1082/3 supports PoE and auxiliary sources
• Robust devices with superior ESD protection and excellent thermal characteristics; all are pin compatible in exposed pad TSSOP-20
• NCP1080/2 deliver up to 13 W for traditional IEEE 802.3af PoE apps; NCP1081/3 deliver 25 W per draft IEEE 802.3at (D3.0) and up to 40 W for proprietary high power PoE apps

NCP3064  NCV3064  :  1.5 A, Step-Up/Down/Inverting Switching Regulator w/Enable

• 150 kHz upgrade to the popular MC33063A/MC34063A, designed for boost, buck and inverting converters with minimal external components
• Improved protection features: thermal shutdown protection, cycle-by-cycle current limit
• ON/OFF feature puts the device into a standby state (<100 uA); NCV3064 meets automotive requirements

NCV8665  :  5.0 V, 150 mA Very Low Quiescent Current LDO Regulator with and Reset and Delay Reset

• Meets ignition-off quiescent current car manufacturer requirement: typical 30 µA quiescent current with 100 uA load; AEC-Q100 qualified
• ±2.0% output voltage accuracy; 600 mV maximum dropout voltage at full rated load current
• Pin compatible with NCV8675 and NCV4275; use when lower output current and very low quiescent current are required

AMIS-30511  AMIS-30512  :  Micro-Stepping Stepper Motor Controllers/Drivers

• Drives 2-phase bipolar stepper motors with 400 mA continuous and 800 mA maximum current; for higher current, see AMIS-30521 and AMIS-30522 (up to 1.6 A maximum current)
• Speed and load angle (SLA) pin allows the development of algorithms for sensorless stall and step-loss detection plus in-situ system characterization
• AMIS-30512 includes 5.0 V regulator, watchdog reset and SPI interface to obtain error registers which report temperature, open/short motor coil, and other warning states when alerted by the error pin

NCP1392  NCP1393  :  Self-Oscillating 600 V Half-Bridge Drivers with Brown-out Input

• Adjustable operating frequency from 25 to 250 kHz with a single resistor
• Adjustable brown-out protection ensures correct bulk voltage operating range; fixed dead time helps prevent shoot through current
• NCP1392B features an autorecovery enable input; NCP1393B features a latched input for severe fault conditions

NCP5890  :  Light Management IC (LMIC) for LCD Backlight and Multi-LED Keypad Backlight

• Drives LEDs for LCD backlighting, keypad backlight or fun-light in a high efficiency dc-dc boost structure
• Ambient light sensor adjusts backlight current to minimize power consumption and improve user comfort
• I2C-command-base lighting features, such as gradual dimming, eliminate the need of processor’s real time resources and software programming

NTLJS1102P  :  8.0 V P-Channel Power MOSFET

• Optimized for high side load switching and load management applications in portable equipment
• RDS(on) rated at 1.2 V logic level gate drive; high efficiency for minimal battery drain
• 2 x 2 x 0.8 mm WDFN-6 package with exposed drain pad yields excellent thermal performance

NTUD3127C  NTUD3128N  NTUD3129P  :  20 V Dual Small Signal MOSFET Family

• Complementary P- and N-Channel (NTUD3127C), Dual N-Channel (NTUD3128N) and Dual P-Channel (NTUD3129P) versions
• Low RDS(on) specified at VGS=1.5 V; low leakage current, IDSS=50 nA and IGSS=±100 nA
• 0.5 mm high, 1.0 x 1.0 mm SOT963 is optimized for power management in ultra-portable equipment

NCP2991G  :  1.3 Watt Class AB Audio Power Amplifier

• Best-in-class PSRR -100 dB rejects TDMA noise and other fluctuations from power supply
• Zero pop-noise with single ended or differential audio input
• Very fast turn-on time, select either 15 or 30 milliseconds

NCS6433  :  Wide Bandwidth, Bidirectional 4-Channel 2:1 Video Switch

• Switches video signals such as RGB, composite, S-Video and component video (YPbPr)
• Single switch-enabled input (low = A port is connected to B port; high = high impedance between the A and B ports)
• Low crosstalk, low on resistance and fast switching times make it suitable for high frequency video applications in high definition LCD TVs

NLAS7223C  :  DPDT Analog Switch for USB 2.0

• Optimized performance and pin layout for high-speed USB 2.0 in portables
• Ultra-low on-capacitance of 7.5 pF (typ) and a typical bandwidth of 900 MHz
• 1.4 x 1.8 mm UQFN-10 for space constrained applications

NLAS5113  NLAS5213  :  1.3 Ohm Analog Switches

• NLAS5113 is an SPST switch; NLAS5213A and NLAS5213B are DPST and dual SPST devices
• Low on-resistance of 1.3 ohms at Vcc = 4.2 V minimizes signal loss for audio switching in cell phones, PDAs
• 450 MHz bandwidth switches video and many other data signals

NUP4016  :  Industry’s Smallest Sub 1 pF ESD Protection Array for High Speed Data Line Protection

• 1.0 x 1.0 x 0.4 mm SOT953 package is smallest available footprint and package height
• ESD protection for USB 2.0, Gigabit Ethernet and other high speed data lines
• Patented technology yields 0.5 pF capacitance and superior protection with industry's lowest clamp voltage

ESD9X7.0  :  Single ESD Protection Diode

• 3.3 V, 5.0 V and 12 V versions also available; all exceed IEC61000-4-2, >±30 kV contact discharge with fast response, low clamp voltage
• Good replacement for MLVs in ESD protection applications
• Ultra-small 1.0 x 0.6 x 0.4 mm SOD923 package fits keypads, jacks, switches, charging lines, battery contacts

NZ9F2V4  NZ9F2V4S  NZ9F5V1  NZ9F5V1S  NZ9F24V  :  200 mW Zener Voltage Regulator Series

• 47 devices with breakdown voltages from 2.4 V to 24 V
• Available with ±5.0% tolerance; S versions are ±2.0% tolerance
• 1.0 x 0.6 x 0.4 mm SOD923 is ideal for cell phones and other space constrained applications

AMIS-49200  :  Fieldbus® Physical Layer Medium Access Unit (MAU) Transceiver

• For low speed FOUNDATION Fieldbus® and Profibus® PA instruments and devices; enables the fieldbus to completely power field devices using the integrated power supply block
• AMIS-49200 is a drop-in replacement for the Yokogawa µSAA22Q MAU, packaged in a 10 x 10 mm LQFP-44; AMIS-49250 is ideal for new, small form-factor designs (7.0 x 7.0 mm NQFP-44 package)
• Data rate of 31.25 kbps voltage mode; dual voltage supply 3.0 - 6.2 V; 500 uA (typ) current consumption

NCP1080  NCP1081  NCP1082  NCP1083  :  Integrated PoE-PD and DC-DC Converter Controllers

• Integrated solution for medium and high power Ethernet applications; NCP1080/1 PoE eliminates local power supplies/adapters, NCP1082/3 supports PoE and auxiliary sources
• Robust devices with superior ESD protection and excellent thermal characteristics; all are pin compatible in exposed pad TSSOP-20
• NCP1080/2 deliver up to 13 W for traditional IEEE 802.3af PoE apps; NCP1081/3 deliver 25 W per draft IEEE 802.3at (D3.0) and up to 40 W for proprietary high power PoE apps

NB3N3020  :  3.3 V LVPECL/LVCMOS Programmable Clock Multiplier

• Premier member of a new programmable clock family, featuring 26 customizable clock multipliers for design flexibility and reduced system cost
• Period jitter of only 5.0 psec expands system timing margin, yields higher reliability and enables higher frequency designs
• Wide output frequency range from 8.0 to 210 MHz; takes a 5.0-27 MHz crystal or 2.0-210 MHz LVCMOS single-ended clock source and generates a differential LVPECL output and a single ended LVCMOS output

NLAS5113  NLAS5213  :  1.3 Ohm Analog Switches

• NLAS5113 is an SPST switch; NLAS5213A and NLAS5213B are DPST and dual SPST devices
• Low on-resistance of 1.3 ohms at Vcc = 4.2 V minimizes signal loss for audio switching in cell phones, PDAs
• 450 MHz bandwidth switches video and many other data signals